Meine karte - 1080 TI FE stock.

Temperaturen limit - stock auto default 84C
Fan speed -auto stock
Power Limit - stock auto 100%

Und...

Meine karte manchmal die Last ( LOAD ) erreicht 85C zusammen mit fan auto speed 60% . Gpuz shows PWR LIMIT ( nicht zeigen Thermal limit ). Und keine Drosselung Uhren. Ist das normal?

Auf pc restarten ( reboot ) 83-84C max , fan max 50% and uhren drosselung.Ich verstehe nicht, diese.



ps: can i use english? I am from England . Thanks !



Sometimes temp limit stops working on my card,fan goes from 49% to 60% on auto, and temps goes as high 85-86C and there is not thrm throttling on clocks, only PWR limit.


Card sometimes goes above temp limit which is 84C. Go to 85-86C and when i looking to GPUZ its showing PWR LIMIT ,not THRM LIMIT.
Can somebody explain me this? 
 


I must restart pc to make again 83-84C max
Rebooting pc cure this. When i reboot pc 83-84C max ,clocks throttle and fan max 49%. 

I tried on 378.69 drivers and 382.05 and newest drivers. ( 3 ). 

Worry about this or its normal?
 
No installed Evga Precision, no Afterburner. 0 OC utilities. Only fraps,cpuz,steam.

it was my topic on evga  com. So problem is still actually.

The temp limit is default at 84. I thought at the default setting the fan is targeted at 50% and the card would start throttling once it hits 84c so it wouldn't go past the temp limit of 84. But in my experience it goes past that limit from time to time and the fan would spin at 60-65%. Is this normal? Again this is at default setting with nothing overclocked. Going past the temp limit hitting 85-86c ( without throttling , gpuz shows VREL or PWR limit instead of THRM ) with loud fan noise is worrisome. I'm not sure if this is a driver problem or this is normal?
I tried on 378,382 and newest drivers.
 
Temps sometimes go past 84C to 86-87C and i dont have THermal limit drop in clocks in gpuz. Gpuz stating Pwr limit or voltage limit. Any ideas?